KELIPOXY II™
|
Non-Sag, High Modulus, Standard Set Epoxy Gel
Kelipoxy II is a two component, 100% solids, non-abrasive, high
modulus epoxy gel. KPII is supplied in easy-to-mix 1:1 by
volume ratio and is color-coded to assure that mixing is
complete. KPII exhibits superior adhesion to both concrete and
steel. |
 |
Product Uses |
|
· Grout for dowel bars, rebars, and anchor bolts in concrete for load bearing applications.
· Bonding hardened concrete and other materials to hardened concrete.
|
Product Advantages |
|
· Moisture insensitive - may be applied to dry or damp concrete or in humid conditions.
· Color-coded for error-free mixing.
· 100% solids, conforms to VOC regulations.
· Conforms to Grade 3, Classes B & C, Type I, IV, & V of ASTM C-881
|
Packaging |
|
· 2 Component cartridges (22oz. & 52 oz.)
· 2 Gallon units
· 10 Gallon units
· 100 Gallon units
|
Equipment |
|
· Hand Operated
· Air Operated
· Bulk Pump
|
![[]](images/spacer.gif)
|
|
![[ Kelken chemical structural anchoring systems and accessories ]](images/logo1.gif){kind=logo}
![[ Home Page ]](images/tab_home.gif){kind=small}
![[ Catalog of anchors, anchoring systems ]](images/tab_catalog.gif){kind=small}
![[ Where to Buy ]](images/tab_wheretobuy.gif){kind=small}
![[ Anchoring Applications ]](images/tab_applications.gif){kind=small}
![[ General Info ]](images/tab_generalinfo.gif){kind=small}
![[ Contact Us ]](images/tab_contactus.gif){kind=small}
![[]](images/logo1a.gif){kind=small}
![[]](images/logo2.gif){kind=logo}
![[]](images/logo3.gif){kind=logo}
![[ Kelken Construction Systems ]](images/kelken.gif)
![[]](images/logo4.gif){kind=logo}
![[]](images/bluecorner_left.gif){kind=small}
![[]](images/bluecorner_right.gif){kind=small}