KELIGROUT™ VOLUME CHART

Always drill an exact depth hole for the embedment needed. Kelken provides approximately twice the amount of Keligrout required to anchor each Kelianchoring System to the specified embedment. These amounts can be easily determined using displacement formulas.

Anchor Diameter	Hole Diameter	Minimum Number of Inches Per 32 oz.
1/4	9/32	375
3/8	7/16	310
1/2	5/8	220
5/8	3/4	200
3/4	7/8	180
7/8	1	175
1	1 1/8	160
1 1/8	1 1/4	120
1 1/4	1 3/8	90
1 1/2	1 3/4	60

If you get less than the chart above shows, check for these causes:

Hole is too deep. Resin lies beneath anchor that "hangs" from nut put on before installation

Too much resin was poured into hole. The anchor displaced surplus into "clear-hole" in material being anchored.

Too large a diameter hole was drilled. Always follow instructions as to diameter