Keligrit™ is a high strength, non-shrink polyester resin
anchoring material. The material is particularly useful when
anchoring in large diameter holes and sets rapidly in inclement weather.
Keligrit™ is highly cost effective.
Features
· Easy mixing with drill and jiffy mixer.
· Catalyst provided will cause exothermic get (set) in 40 min. at 70°F
· May be used in freezing conditions down to 10°F by keeping resin warm (70°) immediately prior to use.
Packaging
1-1/2 gallons of resin, properly pre-portioned catalyst, and 1-1/2 gallons of silica sand is packaged into a 5 gallon pail. When mixed together it produces 2.4 gallons of material.
![[ Kelken chemical structural anchoring systems and accessories ]](images/logo1.gif){kind=logo}
![[ Home Page ]](images/tab_home.gif){kind=small}
![[ Catalog of anchors, anchoring systems ]](images/tab_catalog.gif){kind=small}
![[ Where to Buy ]](images/tab_wheretobuy.gif){kind=small}
![[ Anchoring Applications ]](images/tab_applications.gif){kind=small}
![[ General Info ]](images/tab_generalinfo.gif){kind=small}
![[ Contact Us ]](images/tab_contactus.gif){kind=small}
![[]](images/logo1a.gif){kind=small}
![[]](images/spacer.gif){kind=spacer}
![[]](images/logo2.gif){kind=logo}
![[]](images/logo3.gif){kind=logo}
![[ Kelken Construction Systems ]](images/kelken.gif)
![[]](images/logo4.gif){kind=logo}
![[]](images/bluecorner_left.gif){kind=small}
![[]](images/bluecorner_right.gif){kind=small}
